ADC Diagnostix 5110N Series Instructions For Use

Otoscope and Accessories Troubleshooting Guide
Trouble Area Possible Cause
Lamp burned out
Wrong lamp Installed
No light output
Batteries are depleted
Lamp not fully inserted
Instrument head Thread/connection
will not connect
Trouble Area Possible Cause
Specula will not
attach properly
Loose or misaligned
magnifying lens
Poor or obstructed
view through lens Lens is damaged
Dim light
output
Visible corrosion on
instrument or accessories excessive moisture
Ophthalmoscope Troubleshooting Guide
Trouble Area Possible Cause
between positions
No light
output
Instrument
head
will not connect Thread/connection
Spot is not The aperture dial
centered
Dim light
output
Aperture or lens wheel Dirt in or damage
will not turn or does so
with difficulty
Visible corrosion
on instrument excessive moisture
Environment
Transportation / Storage:
Environmental Operating Range:
Max. Operating:
Corrective Action
Replace the lamp
Replace the lamp
Replace with fresh
AA batteries
Re-insert lamp
Service
is damaged required
Corrective Action
Specula mount Service
is damaged required
Lens mount Service
is damaged required
Lens is dirty Clean with lint-free cloth
Service required
Lamp near end Replace the lamp
of useful life
Batteries are Replace with fresh
depleted AA batteries
Damage from Service
required
Corrective Action
Aperture dial is Rotate aperture
dial
Lamp burned Replace the lamp
out
Wrong lamp Replace the lamp
installed
Batteries are Replace with fresh
depleted AA batteries
Lamp not fully Re-insert
inserted lamp
Service
is damaged required
Move aperture dial to
is not centered the full detent position
Lamp near end Replace the lamp
of useful life
Batteries are Replace with fresh
depleted AA batteries
Service
to required
mechanism
Damage from Service
required
-4°F to 120.2°F (-20°C to 49°C)
Relative Humidity: 95 %
500 hPa – 1060 hPa, Altitude
50°F to 120.2°F (10°C to 49°C)
RH 95 % (Max)
500 hPa – 1060 hPa, Altitude
95°F (35°C)
Pocket Diagnostic Instruments
Instructions for Use
LIMITED WARRANTY
ADC ® warrants its products against defects in materials and workmanship under
normal use and service as follows:
1. Warranty service extends to the original retail purchaser only and
commences with the date of delivery.
2. The instruments are warranted for two years. The LED lamps are warranted for life.
What Is Covered:
Repair, or replacement of parts, and labor.
What Is Not Covered:
Transportation charges to ADC. Batteries where supplied. Damages caused by
abuse, misuse, accident, or negligence. Incidental, special, or consequential
damages. Some states do not allow the exclusion or limitation of incidental,
special, or consequential damages, so this limitation may not apply to you.
To Obtain Warranty Service:
Devices should be contained in their transport/storage cases when being
returned to ADC to ensure that they are not damaged during transport and
handling. Do not ship contaminated devices or storage cases to ADC's facility.
Send item(s) postage paid to ADC, Attn: Repair Dept., 55 Commerce Dr.,
Hauppauge, NY 11788. Please include your name and address, phone no.,
proof of purchase, and a brief note explaining the problem.
Implied Warranty:
Any implied warranty shall be limited in duration to the terms of this
warranty and in no case beyond the original selling price (except where
prohibited by law). This warranty gives you specific legal rights and
you may have other rights which vary from state to state.
To register your product,
visit us at
www.adctoday.com
and follow the links
ADC
55 Commerce Drive
Hauppauge, NY 11788
U.S.A.
SC Cattus SRL
Aleea Carpati nr. 53 Sc. B Ap. 64
Târgu-Mures, România, EU
IB p/n 9362-00 rev 10 (09/23/2021)
Inspected, assembled and
packaged in the U.S.A.
Components made in Pakistan
tel: 631-273-9600
toll free: 1-800-232-2670
fax: 631-273-9659
www.adctoday.com
info@adctoday.com
MD
Printed in the U.S.A.