Installing The Ink Tanks - Canon PIXMA IP2000 Quick Start Manual

Installing the Ink Tanks

• For safety reasons, store ink tanks out of the reach of small children.
• Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
protective cap
6
1
Take out the black ink tank.
2
Hold the ink tank as shown in the
diagram and remove the protective cap.
• Do not touch the ink port.
• Do not attempt to reattach the
protective cap once it has
been removed.
3
Insert the black ink tank into the right-
hand slot.
4
Press the tab until it clicks into place.
5
Use the same procedure to install the
color ink tank in the left-hand slot.
6
Close the Front Cover.
Wait until the POWER lamp remains fully lit (about 60
seconds).
ink port