Canon PIXMA IP2000 Quick Start Manual page 25

About the Settings Explained Below
The settings explained on the following pages cannot be made on some cameras. If any setting cannot be
made, the default setting explained above is used.
Names of settings that are displayed on Canon PictBridge-compliant cameras are used in the description
given below.
Different names may be displayed on your camera depending on the brand or model.
For details, refer to your camera's instruction manual.
About "Paper Size" and "Paper Type"
To change the paper size or paper type, operate the camera to select the PictBridge print setup mode and
confirm or check the settings.
By default, 10×15cm / 4"×6" is selected in "Paper Size" and "Photo" (Photo Paper Plus Glossy) is
selected in "Paper Type" for this printer.
To use Photo Paper Pro, select "Fast Photo" in "Paper type".
The following sizes and types of paper can be loaded in the printer by selecting options in "Paper Size"
and "Paper Type".
"Paper Size" setting
10×15cm / 4"×6" (Default)
13×18cm / 5"×7"
A4
About "Layout" and "Trimming"
By default, "Borderless" is selected in "Layout" and "Off (No trimming)" is selected in "Trimming" for
this printer.
About "Image optimize"
By default, "On (Exif Print)" is selected for this printer.
About "Date print"
By default, "Off" is selected for this printer.
• This printer can handle only Exif/JPEG image data to produce photos using PictBridge.
• Never disconnect the USB cable during printing.
• When disconnecting the USB cable between the digital camera and printer, follow the instructions
given in the instruction manual of the camera.
• Controls of the digital camera cannot be used for the following:
- Print quality setting
- Printer maintenance
"Paper Type" setting
Photo (Default)
Fast Photo
Photo
Photo
Fast Photo
Paper loaded in printer
Photo Paper Plus Glossy
Photo Paper Plus Semi-
Gloss
Glossy Photo Paper
Photo Paper Pro
Photo Paper Plus Glossy
Photo Paper Plus Glossy
Photo Paper Plus Semi-
Gloss
Glossy Photo Paper
Photo Paper Pro
23