Table of Contents
Advertisement
QUI-1086
Outlet port: Provides a receptacle for the bag sampling accessory. The screwcap
➑
prevents dirt from entering the outlet port when not in use.
Bag sampling accessory: Provides a means for filling air sampling bags.
➒
Base screws: Must remain tight and should be checked prior to beginning
10
sampling.
Charging port: Used to connect a charger for recharging the internal battery.
11
Belt clip.
12
Internal rechargeable battery.
13
Mode indicator: For service use only.
14
Mode selector: For service use only.
15
Hex key: For service use only.
16
Back-pressure adapter: Gives the required minimum back-pressure the pump
17
needs for low-flow TD use. Use this in conjunction with the ⅛" tubing with
standard ¼" and 6 mm o.d. TD tubes for flows up to 100 mL/min.
PTFE tubing and TD tube adapter: Use the adapter in place of the back-pressure
18
adapter when sampling onto SafeLok
www.markes.com
tubes or at flows greater than 100 mL/min.
™
Page 9
Advertisement
Table of Contents
