AG Electronica XBee 2 Series Manual page 78

www.agelectronica.com www.agelectronica.com
XBee Series 2 ZigBee OEM RF Modules v1.x2x [2007.07.019] Development Guide
NOTE: To read a parameter value stored in a register, leave the parameter field blank.
The example above issues the DL (Destination Address Low) command to change destination
address of the module to "0x1F". To save the new value to the module's non-volatile memory,
issue WR (Write) command after modifying parameters.
© 2007 Digi International, Inc. 77
www.agelectronica.com www.agelectronica.com