AG Electronica XBee 2 Series Manual page 56

www.agelectronica.com
XBee Series 2 ZigBee OEM RF Modules v1.x2x [2007.07.019]
Start Delimiter Length
0x7E MSB LSB
API Identifier
0x95
64-bit Address (bytes 5-12)
Indicates the 64-bit address of
the remote module that
transmitted the node
identification frame.
16-bit Network Address
(bytes 13-14)
Set to the 16-bit
network address of
the remote. Set to
0xFFFE if unknown
Receive Options (byte 15)
0x01 = Packet Acknowledged
0x02 = Packet was a broadcast
packet.
16-bit Network Address
bytes 16-17
Set to the 16 -bit
network address of
the remote. Set to
0xFFFE if unknown .
64-bit Address (bytes
bytes 18-25
iIndicates the 64 -bit
address of the remote
module that transmitted
the node identification
frame.
www.agelectronica.com
Node Identification Indicator
API Identifier Value: 0x95
This frame is received on the coordinator when a module transmits a node identification message
to identify itself to the coordinator (when AO=0). The data portion of this frame is similar to a
Node Discovery response frame (see ND command).
Figure 7‐19. Node Identification Indicator
Frame Data Checksum
API-specific Structure 1 Byte
Identifier-specific Data
cmdData
6
1
2
7
3 8
4
9
5 10
11
© 2007 Digi International, Inc.
NI-String (bytes 26-n)
Node identifier string on
the remote device. The
NI-String is terminated
with a NULL byte (0x00).
Parent Address (2 bytes)
Indicates the 16 -bit address
of the remote's parent or
0xFFFE if the remote has no
parent.
Device Type (1 byte)
0 = Coordinator
1 = Router
2 = End Device
Source Action (1 byte)
1 = Frame sent by node
identification pushbutton
event (see D0 command)
2 = Frame sent after joining
event occurred ( see JN
command)
Profile ID (2 bytes)
Set to
MaxStream's
Profile ID
Manufacturer ID (2 bytes)
Set to MaxStream's
Manufacturer ID
www.agelectronica.com
Chapter 7 ‐ API Operation
55
www.agelectronica.com