Xbee Series 2 Oem Rf Modules; Key Features; Worldwide Acceptance - AG Electronica XBee 2 Series Manual

www.agelectronica.com
1. XBee Series 2 OEM RF Modules

1.1. Key Features

1.1.1. Worldwide Acceptance

www.agelectronica.com
The XBee Series 2 OEM RF Modules were engineered to
operate within the ZigBee protocol and support the unique
needs of low-cost, low-power wireless sensor networks.
The modules require minimal power and provide reliable
delivery of data between remote devices.
The modules operate within the ISM 2.4 GHz frequency
band.
High Performance, Low Cost
• Indoor/Urban: up to 133' (40 m)
• Outdoor line-of-sight: up to 400' (120 m)
• Transmit Power: 2 mW (+3 dBm)
• Receiver Sensitivity: -96 dBm
RF Data Rate: 250,000 bps
Advanced Networking & Security
Retries and Acknowledgements
DSSS (Direct Sequence Spread Spectrum)
Each direct sequence channel has over
65,000 unique network addresses available
Point-to-point, point-to-multipoint
and peer-to-peer topologies supported
Self-routing, self-healing and fault-tolerant
mesh networking
FCC Approval (USA) Refer to Appendix A [p50] for FCC Requirements.
Systems that contain XBee Series 2 RF Modules inherit MaxStream Certifications.
ISM (Industrial, Scientific & Medical) 2.4 GHz frequency band
Manufactured under ISO 9001:2000 registered standards
XBee Series 2 RF Modules are optimized for use in US, Canada, Australia, Israel
and Europe (contact MaxStream for complete list of agency approvals).
© 2007 Digi International, Inc.
www.agelectronica.com
Low Power
XBee Series 2
• TX Current: 40 mA (@3.3 V)
• RX Current: 40 mA (@3.3 V)
• Power-down Current: < 1 µA @ 25
Easy-to-Use
No configuration necessary for out-of box
RF communications
AT and API Command Modes for
configuring module parameters
Small form factor
Extensive command set
Free X-CTU Software
(Testing and configuration software)
Free & Unlimited Technical Support
www.agelectronica.com
o
C
4