Table of Contents
Advertisement
www.agelectronica.com
Xbee Series 2 ZigBee OEM RF Modules v1.x2x [2007.07.019]
Table A‐01. antennas approved for use with the XBee Series 2 RF Modules
YAGI CLASS ANTENNAS
Part Number
A24-Y6NF
A24-Y7NF
A24-Y9NF
A24-Y10NF
A24-Y12NF
A24-Y13NF
A24-Y15NF
A24-Y16NF
A24-Y16RM
A24-Y18NF
OMNI-DIRECTIONAL ANTENNAS
Part Number
A24-C1
A24-F2NF
A24-F3NF
A24-F5NF
A24-F8NF
A24-F9NF
A24-F10NF
A24-F12NF
A24-F15NF
A24-W7NF
A24-M7NF
PANEL CLASS ANTENNAS
Part Number
A24-P8SF
A24-P8NF
A24-P13NF
A24-P14NF
A24-P15NF
A24-P16NF
A24-P19NF
* If using the RF module in a portable application (For example - If the module is used in a handheld device and the antenna is less than 20cm from
the human body when the device is in operation): The integrator is responsible for passing additional SAR (Specific Absorption Rate) testing based on
FCC rules 2.1091 and FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields, OET Bulletin and Supplement C. The testing
results will be submitted to the FCC for approval prior to selling the integrated unit. The required SAR testing measures emissions from the module and
how they affect the person.
RF Exposure
WARNING: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of
20 cm or more should be maintained between the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance are not recommended. The antenna used for this
transmitter must not be co-located in conjunction with any other antenna or transmitter.
The preceding statement must be included as a CAUTION statement in OEM product manuals in order to alert users of FCC RF Exposure compliance.
www.agelectronica.com
XBee Series 2 RF Modules: XBee Series 2 RF Modules have been tested and approved for use
with all the antennas listed in the tables below. (Cable-loss IS required when using gain antennas
as shown below.)
Type (Description)
Yagi (6-element)
Yagi (7-element)
Yagi (9-element)
Yagi (10-element)
Yagi (12-element)
Yagi (13-element)
Yagi (15-element)
Yagi (16-element)
Yagi (16-element, RPSMA connector)
Yagi (18-element)
Type (Description)
Surface Mount integral chip
Omni-directional (Fiberglass base station)
Omni-directional (Fiberglass base station)
Omni-directional (Fiberglass base station)
Omni-directional (Fiberglass base station)
Omni-directional (Fiberglass base station)
Omni-directional (Fiberglass base station)
Omni-directional (Fiberglass base station)
Omni-directional (Fiberglass base station)
Omni-directional (Base station)
Omni-directional (Mag-mount base station)
Type (Description)
Flat Panel
Flat Panel
Flat Panel
Flat Panel
Flat Panel
Flat Panel
Flat Panel
Europe (ETSI)
The XBee Series 2 RF Module has been certified for use in several European countries. For a
complete list, refer to www.maxstream.net.
If the XBee Series 2 RF Modules are incorporated into a product, the manufacturer must ensure
compliance of the final product to the European harmonized EMC and low-voltage/safety
© 2007 MaxStream, Inc.
Min. Separation
Gain
Application*
Required
8.8 dBi
Fixed
2 m
9.0 dBi
Fixed
2 m
10.0 dBi
Fixed
2 m
11.0 dBi
Fixed
2 m
12.0 dBi
Fixed
2 m
12.0 dBi
Fixed
2 m
12.5 dBi
Fixed
2 m
13.5 dBi
Fixed
2 m
13.5 dBi
Fixed
2 m
15.0 dBi
Fixed
2 m
Min. Separation
Gain
Application*
Required
1.5 dBi
Fixed/Mobile
20 cm
2.1 dBi
Fixed/Mobile
20 cm
3.0 dBi
Fixed/Mobile
20 cm
5.0 dBi
Fixed/Mobile
20 cm
8.0 dBi
Fixed
2 m
9.5 dBi
Fixed
2 m
10.0 dBi
Fixed
2 m
12.0 dBi
Fixed
2 m
15.0 dBi
Fixed
2 m
7.2 dBi
Fixed
2 m
7.2 dBi
Fixed
2 m
Min. Separation
Gain
Application*
Required
8.5 dBi
Fixed
2 m
8.5 dBi
Fixed
2 m
13.0 dBi
Fixed
2 m
14.0 dBi
Fixed
2 m
15.0 dBi
Fixed
2 m
16.0 dBi
Fixed
2 m
19.0 dBi
Fixed
2m
www.agelectronica.com
Agency Certifications
Cable-loss
7.8dB
8 dB
9 dB
10 dB
11 dB
11 dB
11.5 dB
12.5 dB
12.5 dB
14 dB
Cable-loss
-
-
.3 dB
2.3 dB
5.3 dB
6.8 dB
7.3 dB
9.3dB
12.3dB
4.5 dB
4.5 dB
Cable-loss
8.2 dB
82 dB
12.7 dB
13.7 dB
14.7 dB
15.7 dB
18.7 dB
64
www.agelectronica.com
Advertisement
Table of Contents
