Midea MAW12V1QWT User Manual page 22

Top of Unit
Fig. 21
The images below show how the Anti-Tip Bracket is to be installed in the window track.
Note the Side Arm Foam was removed for illustration purposes only.
Fig. 22
 Page 22 
Top view
The factory installed 1/2" screw
must be re-used to secure the
Anti-Tip Bracket. Failing to use
this screw could damage the
air conditioner.
Extend into Window Track
Fig. 23
D. The Anti-Tip Brackets
must be extended into the
window track opening (the
vertical track your window
slides up and down in) until
they stop.
Secure the brackets in place
by using the provided 1/2"
Phillips head screw.
WARNING
You must extend the
Anti-Tip Brackets into the
Window Track Opening.
Failure to follow this warning
may cause serious injury.
Top view
Anti-Tip Bracket
Installed in Window
Track Opening