Midea MAW12V1QWT User Manual page 17

OUTSIDE
INSIDE
Wooden Windows
Fig. 5
Vinyl Type Windows with a Lipped Sill
A1. Secure the bracket to the windowsill by drilling 1/8" pilot holes and installing the
1/2" Type A screws as shown in Fig. 6.
1/2" Type A
Fig. 6
Wooden Type Windows with a Flat Sill
A2. Secure the bracket to the windowsill by drilling 1/8" pilot holes and installing the
1/2" and 1" Type A screws as shown in Fig. 7.
1" Type A
1/2" Type A
Fig. 7
Depending on the
level used, place at
either location below
Fig. 8
to check level. Here is what
1/4 bubble on
the level
should look
like.
Vinyl Lip
INSIDE
OUTSIDE
Vinyl-Clad Windows
1" Type A
B. Move the Angled Support Arms
toward the exterior wall until
the feet touch the wall. Place
the level on the bracket and
adjust the Support Arms so that
it is level or tilted 1/4 bubble
downward and towards the
outside.
1/2" Type A
1/2" Type A
 Page 17 