Icom IC-2710H Service Manual page 6

Dual band fm transceiver
Hide thumbs Also See for IC-2710H:
Table of Contents

Advertisement

SECTION 3
•Remove the cover (Fig.3-1)
®
Unscrew the one screw
open the cover.
Use a flat head screw driver or similar flat instrument to
lever the bottom cover open via the 2 openings towards
the rear.
& WARNING!
NEVER attempt to open the cover using
your finger nails, this may result in injury.
•Remove the MAIN unit (Fig.3-3)
Unsolder 3 points from the antenna connector, then
unscrew 11 screws © , and then disconnect the fan motor
connector (J4).
Remove the MAIN unit to lift up in the direction of the
arrow,@.
DISASSEMBLY INSTRUCTIONS
from the bottom cover, then
Fig. 3-1
• Remove the speaker (Fig.3-2)
Disconnect the speaker connector (J3), then lift up the
clip part of the speaker plate,
arrow.
@
Speaker plate
© (nickel, 8 mm) x 11
3-1
@
in the direction of the
Fig. 3-2
Fig. 3-3

Advertisement

Table of Contents
loading

Table of Contents