Upgrading Your Machine's Software - Brother CPS5XVY Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX

Upgrading Your Machine's Software

You can use a computer to download software upgrades for your sewing machine.
Visit our website at www.brother.com for notification of available updates.
Note
There are two upgrade files. Be sure to download both files successively.
Memo
When the machine's software is upgraded, saved combinations of character and decorative stitches are
erased. However, saved embroidery patterns are not erased.
While the software is being upgraded, the buzzer will not sound when a key is pressed.
a While holding
turn on the machine.
The following screen appears.
b Plug the USB cable connectors into the
corresponding USB ports on the computer and
on the machine.
The "Removable Disk" icon appears in "My
Computer" on the computer.
Copy the first upgrade file to "Removable
c
Disk".
The message "Connected to PC. Do not
disconnect the USB cable." appears.
When the screen shown in step
d
again, press
The message "Saving the upgrade file. Do
not turn main power to OFF." appears.
192
(Settings key) pressed,
a
appears
.
e When the following screen appears, the first
upgrade file is downloaded.
f Copy the second upgrade file to "Removable
Disk".
g When the screen shown in step
again, press
The message "Saving the upgrade file. Do
not turn main power to OFF." appears.
When the following screen appears, upgrading
h
is completed.
Note
If an error occurred, an error message
appears. At this time, turn the machine off,
and then start the procedure again from step
a
.
i Disconnect the USB cable, and turn the
machine off, then on again.
e
appears
.