Free-Motion Quilting - Brother CPS5XVY Operation Manual

Computerized sewing and embroidery machine
Table of Contents

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
■ Using the optional quilting guide
Use the quilting guide to sew parallel stitches that
are equally spaced.
Insert the stem of the quilting guide into the
a
hole at the rear of the walking foot or presser
foot holder.
Walking foot
Presser foot holder
Adjust the stem of the quilting guide so that
b
the guide aligns with the seam that has already
been sewn.
Note
The optional quilting guide is available
through brother dealer.
108

Free-motion quilting

With free-motion quilting, lower the feed dogs (using
the drop feed lever) so that the fabric can be moved
freely in any direction.
When free-motion quilting, use the following
instructions with the optional quilting foot.
a
Remove the presser foot and the presser foot
holder.
• Refer to "Removing and attaching the presser
foot holder" (page 44).
b
Secure the quilting foot with the presser foot
holder screw.
The pin on the quilting foot should be
positioned over the needle clamp screw.
2
a Pin on quilting foot
b Presser foot holder screw
c Needle clamp screw
c
Hold the quilting foot in place with your right
hand, and then tighten the presser foot holder
screw using the screwdriver in your left hand.
1
a Presser foot holder screw
1
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Innov-is 1200Nv1200

Table of Contents