Beko WCV8649 Series User Manual page 29

WARNING: You need internet connection on your smart device to proceed with
HomeWhiz setup. Otherwise, the HomeWhiz application will not let you finish the setup
procedure successfully. Please contact your internet service provider if you are having
problems with your internet connection.
4.3.15.2 Setting up a washing machine that is connected to someone else's account
If the washing machine you want to use was previously introduced to the system with someone else's
account, you must establish a new connection between your HomeWhiz Application and the appliance.
• Download HomeWhiz Application on the new smart device you want to use.
• Create a new account and log in to this account on the HomeWhiz app.
• Follow the steps described in HomeWhiz Setup (4.3.15.1 HomeWhiz Setup) and proceed with the
setup procedure.
Since the HomeWhiz Feature and Remote Control function on your appliance is
operated via pairing using Bluetooth technology only one Homewhiz application can
operate it at a time.
WARNING: There is a limit to the smart devices that can be paired with the appliance. If
this limit is exceeded, the first paired device will be deleted from the list of paired
devices on the appliance and you will have to repeat the setup procedure on that
particular smart device.
4.3.15.3 Remote Control function and its use
After HomeWhiz setup, bluetooth will automatically turn on. To activate or deactivate the bluetooth
connection, please see 4.3.8.2 Bluetooth 3'''.
If you turn off and on your machine while bluetooth is active, it will automatically reconnect. In cases
such as paired device going off the range, bluetooth will automatically turn off. For this reason, you will
need to turn on the bluetooth again if you want to use the Remote Control function.
You can check the bluetooth symbol on the display to track your connection status. If the symbol is
continuously on, you have bluetooth connection. If the symbol is flashing, the product is trying to
connect. If the symbol is off, you have no connection.
WARNING: When the bluetooth connection is on in your product, Remote Control
function will be selectable. If the Remote Control function cannot be selected, check the
connection status. If the connection cannot be established, repeat the initial set-up
settings on the appliance.
WARNING: For safety reasons, the product's door will remain locked while the Remote
Control function is enabled,independently of the operating mode. If you want to open
the door of the product, you will need to turn the program selection knob or press the
remote control key to deactivate the remote control function.
When you want to control your washing machine remotely, you need to activate the Remote Control
function by pressing the Remote Control button while the programme knob is in the Download
Program/Remote Control position button on the control panel of your washing machine. When your
product is accessed, you will see a screen similar to the below.
HomeWhiz Application may require you to type the product
number shown on the product label. You can find the product
label inside of the appliance door. The product number will be
shown on the label.
28 EN