Beko WCV8649 Series User Manual page 28

To use the HomeWhiz function, the app must be installed on your smart device and
your washing machine must be paired to
your smart device via bluetooth. If your washing machine is not paired to your smart
device it works as an appliance which does not have a HomeWhiz feature.
Your product will operate as paired to your smart device via bluetooth. The controls
made by means of the application will be enabled through this pairing; therefore the
bluetooth signal strength between the appliance and the smart device must be
adequate.
Please visit www.homewhiz.com to see the Android and iOS versions supported by the
HomeWhiz application.
In case of power failure, you can use the loading door emergency handle under the
pump filter cap to open the loading door manually.
4.3.15.1 HomeWhiz Setup
In order for the application to run, a connection between your appliance and the HomeWhiz Application
must be established. For this connection to be established you must follow the steps below for setup
procedure on both the appliance and the HomeWhiz Application.
• If you are adding an appliance for the first time, tap „Add/Remove Appliance" button on the HomeWhiz
Application. After this step tap „Tap here to setup a new appliance". Follow steps below as well as steps
in the Homewhiz Application to perform the setup.
• To start the setup, make sure that your machine is turned off. Press and hold the Temperature button
and the Remote Control Function button simultaneously for 3 seconds to switch your machine to
HomeWhiz setup mode.
• When the appliance is in HomeWhiz setup mode, you will see an animation on the display and the
bluetooth icon will flash until your machine gets paired with smart device. Only programme knob will be
active in this mode. Other buttons will be inactive.
• On the screen you see on the app, select the washing machine and press next.
• Proceed reading the on-screen instructions until HomeWhiz asks you about the product you wish to
connect to your smart device.
• If your washing machine successfully paires with your device, your display will automatically turn on in
the normal mode and the bluetooth icon will remain on as you hear a setup successful melody from the
appliance.
• Return to the HomeWhiz application and wait until the setup is complete. When setup is complete,
give your washing machine a name. Now, you can tap and see the product you have added in the
HomeWhiz Aplication.
If you cannot successfully perform the setup within 5 minutes, your washing machine
will turn off automatically. In this case, you will have to start over the setup procedure. If
the problem persists contact the Authorised Service Agent.
You can use your washing machine with more than one smart device. To do this,
download the HomeWhiz app on the other smart device as well. When you launch the
app, you will need to log in with the account you previously created and paired your
washing machine. Otherwise, please read "Setting up a washing machine that is
connected to someone else's account".
27 EN