Table of Contents
Advertisement
4.3.11 Loading door lock
There is a locking system on the loading door of the machine that prevents opening of the loading door
in cases when the water level is unsuitable. "Door Locked" symbol appears on the display when the
loading door is locked.
If the Remote Control Function is selected, the door will be locked. In order to open the
door you must deactivate Remote Start Function by either pressing the Remote Start
button or changing the program position.
Opening the loading door in case of power failure:
In case of power failure, you can use the loading door emergency handle under the
pump filter cap to open the loading door manually.
In case of power failure, you can use the loading door emergency handle under the
pump filter cap to open the loading door manually.
4.3.12 Changing the selections after programme has started
Adding laundry after the programme has started :
If the water level in the machine is suitable when you press Start/Pause button, the door lock will
be deactivated and the door will open, allowing you to add garments. The door lock icon on the display
goes off when the door lock is deactivated. After adding garments, close the door and press
Start/Pause button once again to resume the washing cycle.
If the water level in the machine is not suitable when you press Start/Pause button, the door lock
cannot be deactivated and the door lock icon on the display remains on.
• Open the pump filter cap.
• Release the loading door emergency handle located at the
rear side of the filter cap.
• Pull down the loading door emergency handle once and
open the loading door. After opening the loading door,
re-insert the loading door emergency handle.
• If the loading door does not open, try again by pulling down
the handle.
25
EN
Advertisement
Table of Contents
