Brother 885-V31 Operation Manual page 91

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
h Start sewing.
Set the sewing speed controller to the left (so
that the speed will be slow).
The sewing machine automatically stops
after sewing reinforcement stitches.
Note
Do not press
i Pull the upper thread at the end of the
stitching to the wrong side of the fabric, and
then tie it with the bobbin thread.
Use scissors to cut the upper thread and the
bobbin thread at the beginning of the stitching.
When you are finished attaching the button, slide the drop feed lever to (to the right as seen from the rear of the machine).
j When you have finished attaching the button,
slide the drop feed lever to
as seen from the rear of the machine) and turn
the handwheel to raise the feed dogs.
Memo
The drop feed lever is normally set to the
right side.
(Thread cutter button).
(to the right
Buttonhole Stitching 89
3