Editing And Saving Patterns; Adjusting The Layout And The Size - Brother 885-V31 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Editing and Saving Patterns

This section describes ways to edit, adjust, reposition and memorize patterns.
Adjusting the layout
and the size
The pattern is normally positioned in the center of the
embroidery frame. You can check the layout before
starting embroidery and change the position and the
size.
Memo
Keys that appear surrounded with a dotted
line (ex.
a After selecting the embroidery pattern, press
.
The sewing screen is displayed.
b Press
The layout LCD is displayed.
) cannot be used.
.
c
Check and adjust the layout.
a Layout within the frame
b Display unit (cm/INCH)
c Available embroidery frames
d Change position keys
e Size key/Layout key
f Rotation key
g Horizontal mirror image key
h Trial key
i Starting point key
j Distance from the center
k Embroidery size
Embroidery frame size
The size of embroidery frame that
can be used is displayed. When
the smaller mark is grayed out in
the display, embroidery frame
(small) cannot be used. These
icons flash if the pattern was
resized, the layout was adjusted,
or the recommended embroidery
frame size was changed.
CAUTION
● Use the embroidery frame that matches
the size of the pattern being embroidered.
Otherwise, the embroidery frame may be
hit by the presser foot and cause injury or
needle breakage.

Editing and Saving Patterns 143

4