Brother 885-V31 Operation Manual page 109

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Memo
When lowering the presser foot, do not push
in the front of the presser foot, otherwise the
darning will not be sewn with the correct
size.
a Do not reduce the gap.
e Pull down the buttonhole lever as far as
possible.
a Buttonhole lever
The buttonhole lever is positioned behind the
bracket on the buttonhole foot.
a Buttonhole lever
b Bracket
a
a
a
b
f Gently hold the end of the upper thread in
your left hand, and then start sewing.
Once sewing is completed, the sewing
machine automatically sews reinforcement
stitches, then stops.
g Raise the presser foot lever, remove the fabric,
and then cut the threads.
h Raise the buttonhole lever to its original
position.
Memo
If the fabric does not feed, for example,
because it is too thick, increase the stitch
length. For details, refer to "Adjusting the
stitch length" (page 59).
Reinforcement Stitching 107
3