Brother 885-V31 Operation Manual page 163

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
No
17
18
19
20
21
22
23
24
25
Error Message
The start/stop button was pressed after selecting a pattern which is
saved in the machine's memory without pressing
The reverse/reinforcement stitch button, needle position button or
thread cutter button was pressed while the bobbin winder shaft is
moved to the right.
A pattern is being saved.
The start/stop button or reverse/reinforcement stitch button was pressed
when no pattern is selected.
Bobbin thread has run out.
Little bobbin thread remains.
When the embroidery unit is attached.
You tried to set a number of characters that will not fit within the frame.
The upper thread has become tangled around the bobbin case, and the
needle is bent and hitting the needle plate, etc., so the sewing machine
stops (refer to page 154).
You tried to use a function that cannot be used when the embroidery
unit is attached.
Probable Cause
Troubleshooting 161
(Retrieve key).
5