Great day TRUCK'N BUDDY Instructions For Installation And Use

TRUCK'N BUDDY For Trucks With a Bedcover
READ ALL INSTRUCTIONS BEFORE USING THE TRUCK'N BUDDY
NOTE: Failure to read instructions before use could result in injury or death.
Instructions for Installation and Use:
Fig. 1
Select desired location on tailgate of truck
making sure the bottom stabilizing angle is
flush against top of tailgate. Mark selected
holes with pencil for drilling. NOTE: A
minimum of 8 machine screws should be
used for secure mounting. See Fig. 2
Fig. 3
MODEL: TNB2001
Contents: See Fig. 1
1 -Truck'N Buddy assembly
8 –1/4" x 1 1/2" machine screws
1 -Grab rail (Already Attached)
Fig. 2
Remove TRUCK'N BUDDY and
drill pilot holes where marked
using a 1/8" drill bit. See Fig. 3
PAGE 1 OF 3