Great day TRUCK’N BUDDY Instructions For Installation And Use

TRUCK'N BUDDY
READ ALL INSTRUCTIONS BEFORE USING THE TRUCK'N BUDDY
NOTE: Failure to read instructions before use could result in injury or death.
Instructions for Installation and Use:
Fig. 1
Select desired location on tailgate of
truck making sure the bottom
stabilizing angle is flush against top of
tailgate. Mark selected holes with
pencil for drilling. NOTE: A minimum of
(6) machine screws should be used for
secure mounting. See Fig. 2
Fig. 3
MODEL: TNB2000
Contents: See Fig. 1
1 Truck'N Buddy assembly 8 - ¼" x 1½"
machine screws, 1 Grab rail, 2 -¼" x 1¾"
bolts, 2 Flat washers, 2-¼" Locknuts
Remove TRUCK'N BUDDY and drill
pilots holes where marked using a 1/8"
drill bit. See Fig. 3
Fig. 2