Summary of Contents for Great day PowerLoader PL250
Page 1
PAGE 1 OF 5 The PowerLoader MODEL PL250 READ ALL INSTRUCTIONS BEFORE USING THE POWERLOADER NOTE: Failure to read instructions before use could result in injury or death. CONTENTS: 1 – PowerLoader 2 - Mounting brackets 4 – 1/4” U-Bolts w/ brackets 16 - Metal Washers 8 - Lock nuts 4 –...
Page 2
PAGE 2 OF 5 INSTRUCTIONS FOR INSTALLATION AND USE STEP 1: Find a clean flat surface to work on and assemble the mounting brackets to the PowerLoader. A. Remove the two 2” Quick Clip pins and fold the Power Loader out. This will allow attachment of mounting brackets to the vertical brace on the Power Loader.
Page 3
PAGE 3 OF 5 Fig. 4a Fig. 4b STEP 2: To load a deer, hay, firewood or other objects, position the ATV about two feet from the object to be loaded. Next, set the brakes of the ATV. Then go to the front of the ATV and remove both 3” Quick Clip pins from the Power Loader (See Fig.
Page 4
PAGE 4 OF 5 STEP 3: First, reel out enough winch cable to pass over both of the fairlead rollers. Bring the winch cable down to the hook buckle and attach cable (See Fig. 8). Fig. 8 A. Then begin to reel in the winch cable.
Page 5
WARNING: Do not travel when the PowerLoader is loaded and extended. WARNING: Use on 4X4 ATVs or UTVs only. For more information about this or other products, contact us at: Great Day, Inc. 604 Kimbrough Dr. * Tallulah, LA 71282 * (866) 649-1918 * www.greatdayinc.com...
Need help?
Do you have a question about the PowerLoader PL250 and is the answer not in the manual?
Questions and answers