Operation; Positioning The Heater; Control Buttons - Dimplex FutuRad FutG2BT Manual

Operation

Before using the heater ensure that all warnings and instructions have been read carefully.
IMPORTANT: Objects or clothing must not be placed on the appliance.
IMPORTANT: Do not operate unless the castors have been securely fitted.
IMPORTANT: The element has been coated with a protective film which will burn off during the first few minutes of use and may
cause a small amount of fuming. This is quite normal, the fumes are non-toxic and will quickly disappear. We recommend that you open a
window to ventilate the room when using the heater for the first time.
To energise the heater simply plug it in. You will hear an audible beep and the Standby button will illuminate red. This indicates the
appliance is energised and ready for use.

Positioning the Heater

WARNING: Always ensure the information outlined in IMPORTANT SAFETY INFORMATION section is strictly
adhered to.
Always ensure that the heater is stood on a firm, level base near to, but not directly underneath a suitable mains
supply socket.
Select the position for the heater ensuring there is clearance from any furniture and fittings of at least 300mm above the heater and
150mm each side and 300mm from the control and end panel. We recommend maximising the clearance where possible.
Screen & Control buttons
Screen
Wireless connectivity
Runback timer icon

Control Buttons

Week day
Auto mode status
Time
Adaptive start
Sound off
Decrease Temperature
(Min 5ºC/43ºF)
Program
Manual mode status
Active program
(Auto mode)
Temperatue
Heat output
Boost mode icons
Keylock
Frost protect mode
Enter / select
Increase Temperature
(Max 30ºC/86ºF)
Standby
Mode / Menu