Operation - Dimplex DHMH20C Instruction Manual

Operation

Put the unit into standby state by plugging into an electrical outlet compliant with
the device and local legislation, and switch on.
1. Turn the power switch on the unit to 'I' or 'II.'
2. Turn the thermostat to the max, and the heater will begin to work. Adjust
accordingly for your desired temperature.
3. When the power switch is on 'I,' the power is 1200W, and when the power switch
is on 'II,' it will work at 2000W.
4. Turn the power switch to the original position to stop the heater.
8
Min
Thermostat
Power Switch
Max