TC-Helicon VoiceTone T1 User Manual page 10

Using the Mic Control Feature
Mic Control allows you to turn effects on and off from the optional TC-Helicon MP-75 microphone.
Push the MIC CONTROL switch in to allow remote on/off control on any or all pedals in a chain. When
Mic Control is not desired, ensure the switch is out. Using multiple pedals requires the control signal
pass through feature to be enabled on all but the last pedal. To enable or disable this feature, hold the
effect footswitch and the switch on the mic for 3 seconds.
Tips for Avoiding Feedback
• Ensure your monitor and/or PA speakers don't aim directly at the front of your mic
• Sing close to the mic, even touching the grill with your lips
• Try a super-cardioid dynamic mic such as TC-Helicon's MP-70 and MP-75
• Set your PA channel EQ and graphic EQ flat
• Have your band play quieter on stage.