System Memory (Dram); Central Processing Unit (Cpu); Expansion Cards - MSI 611BF User Manual

3d-agp vga / 3d-audio m/b for socket 370

Table of Contents

7. Keyboard Power on Function: JP6

This function only support when use ATX power supply .

and use ATX power supply , you can choice power on system by power button or

keyboard in "Power On Function" item of "Integrated Peripherals Setup".

2-6 System Memory (DRAM)

This main board supports two 168-pins DIMM modules, the Max Memory Size is

256MB(512MB using 128Mb technology).

168-pin DIMM

The mainboard provides a 370-pin ZIF Socket 370. The CPU on motherboard must have a fan

attached to prevent overheating.

WARNING: Without a fan or heat sink, the CPU will overheat and cause damage to both the CPU

and the motherboard.

To install a CPU, first turn off your system and remove its cover. Locate the ZIF socket and

open it by first pulling the lever sideways away from the socket then upwards to a 90-degree

right angle. Insert the CPU with the white dot as your guide. The white dot should point

towards the end of the level. The CPU has a corner pin for three of the four corners, the CPU

will only fit in the one orientation as shown as follow. With the added weight of the CPU fan, no

force is required to insert the CPU. Once completely inserted, hold down on the fan and close

the socket's lever.

IMPORTANT:

You can setting the CPU ratio and Host Frequency in the BIOS setup on page

DIMM 1

168-pin DIMM



168-pin DIMM

System can be

DIMM 2

Accept or Not



When choose 1-2 closed

Table of Contents

612bf