Advertisement
Throttle Duty Cycle
This option will determine how much power will be used by the CPU ,
if the system goes into suspend mode.
VGA Active Monitor
During Enabled, if there's no activity in the monitor screen the
system will go into Power Saving Mode. During Disabled, the system will
go into Power Saving Mode, whether there is activity in the monitor screen
or not. The settings are Disabled and Enabled.
Soft-Off by PWR-BTTN
The settings are Delay 4 sec or Instant-off. During Delay 4 sec, if
you push the switch one time, the system goes into suspend mode and if
you push it more than 4 second, the system will be turned off. During
instant-off, the system will turn off once you push the switch.
CPUFAN Off in Suspend
During Enabled, if the system goes into suspend mode, the CPU fan
will stop. During Disabled, if the system goes into suspend mode the CPU
fan will resume. This function is only available for System Hardware
Monitor Chipset.
Resume by Ring
During Disabled, the system will ignore any incoming call from the
modem or LAN. During Enabled, the system will boot up if there's an
incoming call from the modem or LAN.
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system, before this function will work.
Restore on AC/Power Loss
The settings are power on or last status. During power on, after
every AC power loss, the system will be turned on. During last status, after
every AC power loss, whatever the system status, it will be the same when
the AC power returns.
4-22
®
Advertisement
