BT Diverse 2000 User Manual page 38

All manuals and user guides at all-guides.com
• Press the
LEFT/RIGHT
the volume or tone required.
The ringer or tone is played for you.
• Press the button to confirm.
OK
Handset settings
The handset setting menu allows the
following settings to be changed.
Beeps You can switch advisory and
warning beeps on or off. Switching
them off will save battery energy but
may deprive you of information you
may need while using your
phone.
Each time you press
•
Button beep
a button, the action is confirmed by a
beep. Default setting is ON.
•
Battery warning beep
when the battery needs charging.
Default setting is ON.
•
Range warning
the handset is too far from the base
station. Default setting is OFF.
•
In-range beep
handset has just logged on to a base
station. The handset will only log on
to a base station if it is within range
and is registered with it. Default
setting is OFF.
•
Confirmation beep
you have followed procedures
correctly. Default setting is ON.
Lets you know that you
•
Error beep
have made a mistake during a
procedure. Default setting is ON.
Auto Backlight The screen and
the buttons light up whenever a button
is pressed. This can be switched on
or off.
buttons to set
Tells you
Tells you when
Tells you the
Confirms that
37