BT Diverse 2000 User Manual page 14

All manuals and user guides at all-guides.com
You can quit any menu at any time
by pressing the
END CALL
To go back one step, press the
button.
To register your Pocket Phone...
...at a Diverse 1010, 1015, 2010
or 2015 base station.
Press and hold down the grey button
at the base station until you hear the
beeps (after about 10 seconds)
...at a Diverse 2-line or ISDN
base station
Press the green LED button. The LED
flashes during the registration process.
...then, at the handset
If this is the first time you are using
the Pocket Phone, the screen displays
REGISTRATE? Complete the following
steps within the next minute:
OK
RED
• Press the button.
OK
• Enter the base station code
(default setting = 0000).
Display shows BASE1.
• Press the button.
OK
Display shows all available
internal numbers.
• Enter the internal number you want
for your Pocket Phone. The handset
is now registered and ready for use.
To register your Pocket Phone to a
second or more base stations see page
46. These are also the steps to follow
if you want to register to only one base
station but do not want it to appear on
the display as BASE 1.
button.
GO BACK
13