Bosch VIP XD Installation And User Manual page 49

VIP XD | Installation and User Guide
VGA Settings
The pre-configured settings are saved as Profile 1 to Profile 8. You can change
the different parameter values within a profile. You can switch between profiles
by clicking the associated tabs.
The pre-configured settings (profiles) cover all standard applications. Only
change the preset values if none of the profiles leads to satisfactory results.
Warning!
Setting values that lie outside the technical specification of the monitor can
result in severe damage to the monitor. Refer to the technical
documentation for the monitor you are using.
Note
All parameters combine to make up a profile. The parameters are partially
independent of one another.
After each change, click the Test button to see the effect of the change on
the connected monitor.
Bosch Security Systems | 2005-05 | V1.0
EN | 49
Configuration using a Web Browser