Bosch VIP XD Installation And User Manual page 46

EN | 46
Date and time
Date format:
Choose the desired date format here
(Europe: DD.MM.YYYY; USA: MM.DD.YYYY; Japan: YYYY/MM/DD).
Unit date and time:
If there are a number of devices operating in your system or network, it is
important to synchronize their internal clocks. For example, it is only possible to
carry out correct identification and evaluation of recordings occurring at the
same time if all devices are operating on the same time.
– Enter the current date. Since the unit time is controlled by the internal clock,
it is not necessary to enter the day of the week. This is added automatically.
– Enter the current time or click Synchr. PC to apply the system time from your
computer to the VIP XD.
Time server
The VIP XD can receive the time signal from a time server using the time server
protocol (RFC 868) and then use it to set the internal clock. The unit calls up the
time signal automatically every ten minutes.
Time zone:
Select the time zone in which the system is located.
Configuration using a Web Browser
Installation and User Guide | VIP XD
Bosch Security Systems | 2005-05 | V1.0