Bosch VIP XD Installation And User Manual page 27

VIP XD | Installation and User Guide
Decoder settings
On this page, you can set the various options for the display of video images on
an analog monitor or a VGA monitor. Several presets are available for
configuration of the VGA video output signal.
MPEG decoder
Monitor name:
The monitor name is used for easy identification of the monitor location when
using VIDOS, the software for management of video surveillance systems.
Enter a unique, unambiguous name here.
Video output standard:
Warning!
Be sure to choose the correct video standard to avoid damaging the
monitor. Selecting a VGA setting with values outside the technical
specification of the monitor can result in severe damage to the monitor.
Refer to the technical documentation for the monitor you are using.
You can adapt the video output signal to the monitor you are using. As well as
the PAL and NTSC options for analog video monitors, 8 pre-configured settings
for VGA monitors are also available.
The pre-configured settings each give priority to different factors (resolution,
margin settings, refresh rate). Details of the settings can be seen on the MPEG
decoder configuration page in the VGA Settings field (accessed using the
Monitor icon in the unit overview).
Bosch Security Systems | 2005-05 | V1.0
EN | 27
Configuration using a Web Browser