Bosch VIP XD Installation And User Manual page 35

VIP XD | Installation and User Guide
Note
Proper password protection with a user password is only guaranteed if the
higher authorization level service is also protected by a password. The
passwords for the service authorization level should therefore always be
assigned first.
User name:
The VIP XD operates with two user names: service and user, which correspond
to different authorization levels.
The user name service represents the highest authorization level. After entering
the corresponding password, you can use it to access all the functions of the
VIP XD and change all configuration settings.
The user name user represents the middle authorization level. You can use it to
connect the unit to a transmitter in the network and to disconnect but not to
change the configuration.
Password:
You can define and change a separate password for each user name if you are
logged on as service or if the unit is not protected by a password.
Enter the password for the selected user name here.
Confirm password:
Re-enter the new password to rule out typing mistakes.
Note
The new password is then saved by clicking the Set button. You should
therefore click the Set button immediately after entering and confirming
the password, even if you also want to assign a password to another user
name.
Language
Website language:
Select the language for the user interface here.
Bosch Security Systems | 2005-05 | V1.0
EN | 35
Configuration using a Web Browser