Table of Contents
Advertisement
Before using for the first time
Danger of injury caused by hot
surfaces.
The range gets hot during operation.
For safety reasons, only use the
range when it has been fully
installed.
The time of day can only be changed
when the mode selector is at Off.
Set the time of day.
Setting the time of day for the
first time
The time of day is shown in 12-hour
clock format.
After connecting the range to the
electrical supply will appear in the
display and the triangle will flash
under :
Use or to set the time of day.
Confirm with OK.
The time of day is now saved.
Before first use
The time of day can be displayed in
24-hour format by setting in the
settings menu to status (see
"Using the oven – Operating the clock/
timer").
The time of day is saved for approx.
150 hours in the event of a power
failure. If the power is restored within
this period, the current time will be
displayed again. If the power supply is
interrupted for longer, the time of day
must be reset.
The time of day display ( ) is
switched off by default (see "Using the
oven – Operating the clock/timer").
The display appears dark if the oven is
switched off. The time of day
continues to run in the background.
31
Advertisement
Table of Contents
