Honeywell T775A Series Installation Instructions Manual page 27

All manuals and user guides at all-guides.com
Fig. 63. Setup - Outputs - Options - Exit.
SETUP
OUTPUTS
RELAY 1
Fig. 64. Setup - Outputs - Relay Menu.
SETUP
OUTPUTS
RELAY 1
TYPE
Fig. 65. Setup - Outputs - Relay - Type.
T775A/B/M SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLERS
2.3.3.6. Exit Options Setup
SETUP
OUTPUTS
OPTIONS
Press the
USE SCHED
button) to exit and return to the Outputs menu.
MIN OFF
DI OPTION
Continue with "2.3.4. Setting up the Relays"
SHOW RT
EXIT
M24525
2.3.4. Setting up the Relays
SETUP
OUTPUTS
RELAY 1
1. From the Outputs menu, use the
TYPE
SCHEDULE
RESET
2. Press the
RESET RT
EXIT
The TYPE selection shown in Fig. 64 displays only for
Relay 1 and Relay 3.
Continue with the remainder of section 3.4 to setup the
M24526
relay outputs.
2.3.4.1. TYPE
SETUP
OUTPUTS
RELAY 1
The Floating option is only available on the T775B2016,
TYPE
T775B2024, T775B2032, and T775B2040 models.
STANDARD
FLOATING
For these models, this selection displays only for Relay 1
and/or Relay 3.
1. Press the
2. Use the
SELECT
3. Press the
TYPE FOR
RELAY 1
M24527
If you select FLOATING, the relays are paired (1-2 or 3-4)
and are setup together. Continue with "2.3.4.1.1. Floating
Relay Menu".
If you select STANDARD, go to "2.3.4.2. SCHEDULE" on
page 29.
27
button (or highlight EXIT and press the
tons to highlight the desired relay (1-4 depending on
model).
button to display the selected relay
menu.
(standard or floating)
button to display the Type values.
and buttons to select STANDARD
OR FLOATING.
Default: STANDARD (not floating)
button to accept the value and return
to the Relay menu.
and but-
62-0254—13