Honeywell T775A Series Installation Instructions Manual page 19

SETUP
SENSORS
SENSOR A
LABEL
Fig. 41. Setup - Sensors - Sensor A - Label.
Fig. 42. Setup - Sensors - Sensor A - Exit.
SETUP
SETUP
SENSORS SENSORS
# SENSORS
SENSOR A
SENSOR B
EXIT
Fig. 43. Setup - Sensors - Sensor B Menu.
All manuals and user guides at all-guides.com
T775A/B/M SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLERS
2.2.2.3. LABEL
SETUP
SENSORS
SENSOR A
For a sensor already labeled, the display positions to and
LABEL
highlights that label.
SENSOR A
1. From the Sensor A selections, use the
BOILER A
OUTDOOR A
DUCT A
2. Press the
DISCHRG A
CHILLER A
3. Use the
ROOM A
SELECT
LABEL FOR
SENSOR A
4. Use the
M24505
NOTE: The label names in list order are: Sensor,
2.2.2.4. Exit Sensor A Setup
SETUP
SENSORS
Press the
SENSOR A
to the Sensors menu.
UNITS
or
CALIBRATE
Use the
LABEL
EXIT
the
M24506
2.2.3. SENSOR B
For the T775M2030 and T775M2048 models only, which
have a High/Low modulating temperature limit, the LIMIT
SETUP
item displays on the Sensor B menu.
SENSORS
SENSOR B
1. From the Sensors menu, use the
CALIBRATE
LABEL
2. Press the
LIMIT
EXIT
M24507
2.2.3.1. CALIBRATE
Setting the calibration value is accomplished the same
way as the Sensor A. See "2.2.2.2. CALIBRATE (the
sensor)" on page 18.
2.2.3.2. LABEL
Setting the label is accomplished the same way as the
Sensor A. See "2.2.2.3. LABEL (the sensor input)" on
page 19.
19
(the sensor input)
buttons to highlight LABEL.
button to display the label list.
and buttons to scroll through list
and highlight the desired label.
You may need to scroll up or down to view all
possible labels.
button to accept the highlighted label
and exit the list.
Boiler, Outdoor, Duct, Dischrg, Chiller, Room,
Supply, Return, and Animals.
button to exit Sensor A selections and return
and buttons to highlight EXIT and press
button.
highlight SENSOR B.
button to display the Sensor B menu.
and
button to
62-0254—13