Important Notes; Important - Keep For Future Reference; Installation - Kidco Angle Mount Safeway Series Manual

Important Notes

IMPORTANT -
ENG
KEEP FOR FUTURE
REFERENCE
• Please take a few minutes to read the
instructions thoroughly. Failure to do so may
result in damage to the gate or in worst case
injury to your child.
Extension Placement Guides
!
Extensions must be added as shown.
Some overlap is intended for variations in wall
construction
Extension Placement Guide for Safeway
(Model G22)
One Optional Extension Kit
42" – 52 1 / " Gate + 1 extension
2
-may be placed on either end
Two Optional Extension Kits
52" – 63" Gate + 2 extensions
-one on each end

Installation

Note-If gate is currently assembled, hinge parts
must be removed before the extensions can be
installed onto gate.
1. Loosen screws and remove hinge parts. (Fig. 1)
2. Place assembly fittings (d) onto gate and
fasten with screws and screw sockets, (b) and
(c), on both top and bottom rails. (Fig. 2)
3. Insert extension (a) into the assembly fittings
and fasten with screws and screw sockets, (b)
and (c), on both top and bottom rail. (Fig. 3)
• When unpacking the gate, carefully check all
parts. Do not use this gate if parts are broken
or missing.
Extension Placement Guide for Wood Safeway
(Model G32)
One Optional Extension Kit
42 1 / " – 51 1 / " Gate + 1 extension
2 2
-may be placed on either end
Two Optional Extension Kits
51" – 60" Gate + 2 extensions
-one on each end
4. Reassemble hinge parts according to
Safeway (Model G22) or Wood Safeway (Model
G32) instructions. (Fig. 4)
IMPORTANT: The distance between first
extension bar and wall/ door frame should be
between 1"-2 / ".
3
8
5. Mount the gate into opening as described in
the instructions for Safeway (Model G22) or
Wood Safeway (Model G32).
3