Care And Service - Vitek VT-3456 Manual Instruction

3456-MP3.qxd 25.09.2008
ENGLISH
buttons to choose the desired track; the LCD
DISPLAY will show the track number from the
chosen album. Press the PROGRAMMING BUT
TON to save the chosen track into memory.
2. Repeat the above described procedure to
choose and save additional tracks.
Up to 20 tracks may be programmed into mem
ory. After 20 tracks have been saved into memo
ry, the LCD DISPLAY will show the blinking
" PROGRAM_ _ _ " symbol.
3. Press the CD PLAY/PAUSE BUTTON to begin
playback; the LCD DISPLAY will show the " "
symbol, the " PROGRAM " symbol and the current
track number.
4. Press the PROGRAMMING BUTTON in idle
mode in order to verify the contents of the pro
gram. The LCD DISPLAY will show the blinking
" P 01 " symbol. Press the FORWARD
SKIP/SEARCH BUTTON or REVERSE
SKIP/SEARCH BUTTON to view the saved track
number. Upon pressing the PROGRAMMING
BUTTON again, the LCD DISPLAY will show the
blinking " P 02 " symbol. Repeat these steps to
verify all of the tracks saved in memory.
5. To erase the memory:
In idle mode, press the CD STOP BUTTON twice
or open the CD COMPARTMENT LID while in idle
mode. The " PROGRAM " symbol will disappear
from the screen.
Programmed MP3 playback mode
6. Press the PROGRAMMING BUTTON in idle
mode. The programming mode symbol,
" PROGRAM ", will blink on the LCD DISPLAY along
with the programmed track number beginning
with the first, " P 01 ". Press the FOLDER UP BUT
TON or FOLDER DOWN BUTTON to choose the
desired folder and then press the FORWARD
SKIP/SEARCH OR REVERSE SKIP/SEARCH
buttons to choose the desired track; the LCD
DISPLAY will show the track number from the
chosen album. Press the PROGRAMMING BUT
TON to save the chosen track into memory.
7. Repeat the above described procedure to
choose and save additional tracks.
Up to 20 tracks may be programmed into mem
ory. After 20 tracks have been saved into memo
ry, the LCD DISPLAY will show the blinking
" PROGRAM " symbol.
8. Press the CD PLAY/PAUSE BUTTON to begin
playback; the LCD DISPLAY will show the " "
symbol, the " PROGRAM_ " symbol and the cur
rent track number.
16:17 Page 6
9. To erase the memory:
Recording from the CD/MP3 player
1. Switch the MODE SELECTOR to the "CD" posi
2. Insert a disc, label side up, into the CD compart
3. Insert a blank cassette into the cassette deck
4. Press the RECORD BUTTON and the PLAY BUT
5. Turn on the CD, choose the desired track as
6. To pause the recording, press the PAUSE BUT
7. To completely stop recording, press the

CARE AND SERVICE

Caring for compact discs
1. Handle discs carefully. Hold discs by their edges
2. Do not attach pieces of tape, stickers, etc. to the
3. Wipe the discs periodically with a soft (non
6
For example: Folder #3, Track #2
Press the FOLDER UP BUTTON to view the cur
rent folder number.
In idle mode, press the CD STOP BUTTON twice
or open the CD COMPARTMENT LID while in idle
mode. The " PROGRAM " symbol will disappear
from the screen.
tion.
ment.
and press the PAUSE BUTTON on the cassette
player.
TON at the same time to prepare for the record
ing process.
The built in ALC system automatically adjusts
the recording level for high quality recordings.
described in the section entitled "CD/MP3 play
back." Press the PAUSE BUTTON on the cas
sette player to begin recording.
TON. To continue recording, press the PAUSE
BUTTON again.
STOP/EJECT BUTTON on the cassette player.
After that, press the STOP BUTTON on the CD
player to stop playback of the CD disc.
only. Never touch the working surfaces of discs.
label side of the disc.
downy), dry cloth. Never use aerosols or anti
static cleaners to clean discs. If needed, buy
special compact disc cleaning solution.