Black & Decker BLBD10GW Owner's Manual page 11

product may vary slightly from what is illustrated.
1. lid cap
2. lid
3. Blending jar:
BlBd10GW: Glass, 42-oz. (1.25 l)
BlBd10pW: plastics, 50-oz. (1.5 l)
4. Handle
5. Gasket
6. Blade assembly
7. Jar base
8. Blender base
9. control panel









How to Use
This product is for household use only.
GeTTiNG sTaRTed
• Remove all packing material and any stickers from the product.
• Remove and save literature.
• Wash all removable parts as instructed in CARe ANd CleANING section of
this manual.
• Wipe outside of appliance with a damp cloth; dry thoroughly.
BleNdeR JaR asseMBlY
1. Turn blending jar upside down and place flat on countertop or work surface.
2. Put gasket on top of blade assembly. Place blade
assembly with gasket into bottom opening of the
jar with blades facing down.
3. Place jar base onto jar and rotate clockwise until it
is tight (B).
4. Turn assembled jar right side up.
5. Place lid with lid cap onto blending jar.
6. Uncoil power cord from storage area under the
base.
B
Note: do not plug in the cord.
7. Place jar assembly on base, making sure it is
pressed firmly into place. (Jar base should not
extend more than ¹⁄
of the base.) (c).
8. Blender is now ready for use.
c
UsiNG YoUR BleNdeR
1. Make sure appliance is oFF.
2. Place foods to be blended into jar.
3. Place lid on jar; make sure lid cap is in place.
4. Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods,
such as ice, cheese, nuts and coffee beans, keep one hand on the lid to keep
blender in place.
5. Press the High (HI) or low (lo) button; then select the speed that best suits
your desired task. To switch speeds, press the High (HI) or low (lo) button
and the new speed desired. (see sPeed CHART on page 24.)
-inch above the rim at the top
8
21