aintenance and care
Replacing the post-motor filter
The post-motor filter assists in
the filtration process to return
cleaner air to the room. Use only
BISSELL replacement filters in
your Zing Compact.
1. Unplug the vacuum from electrical
2. Remove the filter door (located on the
back of the vacuum) by pushing down
on the tab and pulling out and away
from the vacuum.
3. The post-motor filter can be hand
washed in cold water with a mild
detergent. Rinse well and air dry
completely before placing back into
4. Replace the filter door by placing the
tabs on the bottom of the filter door
into the notches on the bottom of the
post-motor filter compartment and
pushing the tab forward back into the
vacuum to lock into place.
w w w . b i s s e l l . c o m
Do not operate cleaner with
damp or wet filters or
without all filters in place.
8 0 0 . 2 3 7 . 7 6 9 1