Subscribe to Our Youtube Channel
Related Manuals for Bissell 1617 SERIES TOTAL FLOORS
Summary of Contents for Bissell 1617 SERIES TOTAL FLOORS
- Page 1 For How-To videos, go to www.BISSELL.com Sections marked with this video icon have more information online. 1617 SERIES *Product images may vary...
-
Page 2: Safety Instructions
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way. www.BISSELL.com... -
Page 3: Table Of Contents
Thanks for buying a BISSELL vacuum Safety Instructions... 2 We’re glad you purchased a BISSELL vacuum. Everything we know about Product View....4... -
Page 4: Product View
To reduce the risk of electric shock, turn danger of suffocation, keep away from you are familiar with all instructions and power switch off and disconnect polarized babies and children. operating procedures. plug from electrical outlet before performing maintenance or troubleshooting checks. www.BISSELL.com... -
Page 5: Assembly
Slide the end of the hose into the Hose Wand Base and warp around the Hose Guides as shown on page 4. 3. Place the TurboBrush Tool into its holder from the front of the vacuum. www.BISSELL.com... -
Page 6: Power Cord
2. Normal Cleaning – Press handle release pedal once. This position is used for most household ATTENTION floor cleaning tasks. Some berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area may enhance this condition. www.BISSELL.com... -
Page 7: Operations
» Hair, string and small objects can block the » Before cleaning under low furniture, check area vacuum hose or tools. Check them occasionally first for objects that might harm the unit or block for obstructions. the vacuum hose. www.BISSELL.com... -
Page 8: Emptying The Dirt Container
3. Grasp the handle and pull the dirt cup straight out to remove from the vacuum. 4. Empty dirt into garbage container. NOTE: Emptying the dirt container after every use will help prevent overfilling, and ensure that the vacuum is ready to go the next time you clean. www.BISSELL.com... -
Page 9: Maintenance & Care
NOTE: Use of moist parts/components in your unit will damage the motor and void your warranty 6. To reassemble, replace the inner cyclone screen by sliding it into the upper tank and rotating it to the left until the locking tabs stop the rotation. www.BISSELL.com... -
Page 10: Clearing Clogs
6. If you notice debris or dirt clogged in the foot hose, remove it by pulling it out. 7. If the clog persists, follow the instructions for checking the rotating floor brush and drive belt on page 11 and inspect the air passageway for obstructions. www.BISSELL.com... - Page 11 8. Check air passageway for obstructions. Remove debris from this area. 9. Replace belt and brush. Rotate brush toward motor pulley to seat the belt properly. 10. Place the brush cover back and secure with its screws. www.BISSELL.com...
-
Page 12: Replace Drive Belt
NOTE: It is important that you use only genuine BISSELL replacement belts. Generic belts many not meet the exact specifications required to keep your vacuum operating at its peak perfor- mance. The use of unbranded belts could lead to early failure of the vacuum and could void your warranty. -
Page 13: Troubleshooting
Please do performed by an authorized service representative. not return Thank you for selecting a BISSELL product. this product For any questions or concerns, BISSELL is happy to to the store. be of service. Contact us directly at 1-800-237-7691. www.BISSELL.com... -
Page 14: Replacement Parts
Crevice Tool 203-1228 Dusting Brush/Upholstery Tool 203-2447 TurboBrush® Tool 203-1768 Extension Wand *Not all parts are included with every model. Febreze is a trademark of The Procter & Gamble Company, Cincinnati, Ohio, used under license by BISSELL Homecare, Inc. www.BISSELL.com... -
Page 15: Warranty
BISSELL Consumer Care. Limited One-Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon Website or E-mail: receipt of the product BISSELL will repair or replace (with new or www.BISSELL.com remanufactured components or products), at BISSELL’s option, free Or Call: of charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part. -
Page 16: Product Registration
Sunday 10am - 7pm ET Visit the BISSELL website: www.BISSELL.com When contacting BISSELL, have model number of cleaner available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim.
Need help?
Do you have a question about the 1617 SERIES TOTAL FLOORS and is the answer not in the manual?
Questions and answers