Do you have a question about the LITTLE GREEN 1400 SERIES and is the answer not in the manual?
Questions and answers
Bill Weiss
April 11, 2025
Can the flex hose be removed for cleaning
1 comments:
Mr. Anderson
May 14, 2025
The provided information does not state whether the flex hose of the Bissell 1400 Series can be removed for cleaning.
This answer is automatically generated
Judy Bradshaw
March 18, 2025
How do you clean the collection/dirty tank? Are the parts removable?
1 comments:
Mr. Anderson
March 18, 2025
To clean the collection tank of the Bissell Little Green 1400 Series, follow these steps:
1. Empty and rinse the Dirty/Collection Tank after each use or when the dirty water reaches the maximum fill line. 2. To remove the tank, lift up the Dirty/Collection Tank retainer lever and take the tank out of the unit. 3. Disconnect the cleaning tool from the Spray Trigger by pushing down on the button lock and pulling straight off (do not twist). 4. Rinse all tools under clean running water. If using the TurboBrush tool, set it to the “SUCTION” position before rinsing. 5. Check the Spray Nozzle for dirt or debris and clean it with a soft bristle brush if needed.
Yes, the parts are removable, including the Dirty/Collection Tank and cleaning tools.
This answer is automatically generated
Vicki Martin
March 3, 2025
How do you clean the clogged sprayer nozzle
1 comments:
Mr. Anderson
March 3, 2025
To clean a clogged sprayer nozzle on a Bissell Little Green 1400 Series, rinse the nozzle under running water and use a soft bristle brush to remove any accumulated dirt or debris.
This answer is automatically generated
Thomas Fall
January 26, 2025
What wattage is required
1 comments:
Mr. Anderson
May 14, 2025
The Bissell 1400 Series is designed for use on a nominal 120-volt, 60 Hz grounded outlet. The specific wattage requirement is not stated in the provided information.
This answer is automatically generated
Dale Gallan
January 20, 2025
WHAT TOOLS ARE INCLUDED WITH THIS MODEL
1 comments:
Mr. Anderson
February 4, 2025
The tools included with the Bissell Little Green 1400 Series are:
LITTLE green ® COMPACT DEEP CLEANER U S E R ’ S G U I D E 1400 Series Thanks / Consumer Services Safety Instructions Product View This Guide / Features / Special Tools Assembly / Operation Clean-Up/Storage Troubleshooting Replacement Parts About Your Warranty...
Page 2
Cleaner. Everything we know about floor care went into the design and construction of this handy, high-tech home cleaning system. Your BISSELL Little Green is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
To reduce the risk of fire, electric shock or injury: Do not use for any purpose other than described in this User’s Guide. Use only BISSELL cleaning products intended for use in this appliance. Use only manufacturer’s recommended attachments. Do not expose to rain, store indoors.
Product View Power Switch Clean/Solution Tank TurboBrush ® *Not included with all models Vacuum Flex Hose with Spray Trigger TurboBrush ® Clip* *Not included with all models Dirty/Collection Tank Built-In Heater Switch* *Select Models only Heat Indicator Light* *Select Models only Flex Hose Clip Tough Stain Brush Tool Quick release...
Begin by locating and organizing all parts before assembly. Familiarize yourself with the parts and where they go. Following this User’s Guide will let you get the best performance from your BISSELL Little Green for many years. Little Green ® Product Features Clean/Solution Tank.
*Optional on some Little Green models. To order optional parts not originally included in your Little Green model, contact BISSELL Customer Service at 1-800-263-2535 or at www.bissell.com. WARNING: Do not use an extension cord with this product.
B.Unscrew the black cap at the bottom of the Clean/Solution Tank. C.Add BISSELL Little Green Formula to the FORMULA fill line (8 oz.) on the Clean/Solution Tank. NOTE: Your Little Green is shipped with an 8 oz. Starter bottle of formula.
Getting Ready Continued Press Power Switch to ON Position. NOTE: If your unit has a built-in heater (not stan- dard on all models), first turn the black power switch to “ON,” then the red heater switch to “ON”. Within 30 seconds, the Heat Indicator light will illuminate (# 5 in diagram), indicating the heater has reached the proper temperature.
When You’re Finished Turn Power Switch to OFF position. Note: If your unit has a Built In Heater turn the Heater Switch off. Unplug Power Cord from outlet. Note: If a significant amount of Little Green formula/water remains, it is all right to leave it in the Clean/Solution Tank for your next cleaning task.
Empty Dirty/Collection Tank Replace with new Brush Lift Tool and point upwards to allow water in Hose to flow into the Dirty/Collection Tank Use BISSELL Little Green formula only Remedies Reposition switch to Brush position Remedies Reposition switch to suction position...
About Your Warranty Limited One Year Warranty BISSELL Ltd., or an authorized BISSELL Service Centre will repair or replace free of charge, any part which is defective or malfunctioning within 1 year of the pur- chase date, provided that it is used for personal, and not commercial or rental service.
Need help?
Do you have a question about the LITTLE GREEN 1400 SERIES and is the answer not in the manual?
Questions and answers
Can the flex hose be removed for cleaning
The provided information does not state whether the flex hose of the Bissell 1400 Series can be removed for cleaning.
This answer is automatically generated
How do you clean the collection/dirty tank? Are the parts removable?
To clean the collection tank of the Bissell Little Green 1400 Series, follow these steps:
1. Empty and rinse the Dirty/Collection Tank after each use or when the dirty water reaches the maximum fill line.
2. To remove the tank, lift up the Dirty/Collection Tank retainer lever and take the tank out of the unit.
3. Disconnect the cleaning tool from the Spray Trigger by pushing down on the button lock and pulling straight off (do not twist).
4. Rinse all tools under clean running water. If using the TurboBrush tool, set it to the “SUCTION” position before rinsing.
5. Check the Spray Nozzle for dirt or debris and clean it with a soft bristle brush if needed.
Yes, the parts are removable, including the Dirty/Collection Tank and cleaning tools.
This answer is automatically generated
How do you clean the clogged sprayer nozzle
To clean a clogged sprayer nozzle on a Bissell Little Green 1400 Series, rinse the nozzle under running water and use a soft bristle brush to remove any accumulated dirt or debris.
This answer is automatically generated
What wattage is required
The Bissell 1400 Series is designed for use on a nominal 120-volt, 60 Hz grounded outlet. The specific wattage requirement is not stated in the provided information.
This answer is automatically generated
WHAT TOOLS ARE INCLUDED WITH THIS MODEL
The tools included with the Bissell Little Green 1400 Series are:
1. 4” Upholstery/Carpet Tool
2. 6” Upholstery/Carpet Tool
3. Spraying Crevice Tool
4. Tough Stain Brush
5. TurboBrush
This answer is automatically generated
can solvent based cleaners be used in Machine?
i filed the cleaning tank with the recomended solution then went to put it in the unit and the solution went all over the place
How do I take apart the tough stain brush tool to clean it?
How to you take off the clear top on the cleaning hose to clean it?