Table of Contents
Advertisement
Note: In some cases it is possible that an error message is displayed. This usually happens when you have
chosen the wrong time or start date. Check your settings!
Note: Note that recording is successful only when a suitable USB memory device is connected to the re-
ceiver at the scheduled time.
Daylight time:
Date:
Time:
Exit the "Time Setting" menu by pressing the EXIT key.
22
here difference between your local time and GMT (Greenwich Mean
Time). For Germany/Austria/Switzerland/Luxembourg valid: UTC +
01:00. For Athens/Bucharest/Istanbul valid: UTC + 02:00. Move left/
right with the arrows to the value you want to set.
Here you can specify whether daylight saving time will be taken into
account.
This point is only available if you have selected "Off" in the "User
GMT" point. Enter the date using the number keys.
This point is only available if you have selected "Off" in the "User
GMT" point. Enter the time using the number keys.
Time setting
Event:
Select "Auto" here and the re-
ceiver automatically obtains
the current time and date (via
signal).
If you select "Manual" here, you
can set the date and time your-
self at the point below.
Time zone:
This point is only available if you
have selected "On" under "User
GMT". You can then specify it
Information
Here you will find information
about the device. This informa-
tion may be helpful when you
want to contact the EDISION
Technical Department or the
point of sale by telephone. Here
you also find out about the soft-
ware version that the receiver
has.
Exit the "Information" menu by
pressing the EXIT key.
Version of December 3th, 2021
Advertisement
Table of Contents
