Edision picco T265 pro User Manual page 19

internet-connected computer from the website HYPERLINK "http://www.edision.gr/" http://www.edision.gr
Save the file downloaded to your computer to the USB memory stick and insert it into the "picco T265 pro"
USB port.
Note: The speed of the update via USB may depend on the organization of the data in the USB memory. It
is recommended to pre-format the USB memory via the "HDD formatting" item in the "USB"/"Memory device
information" menu (start formatting with the yellow key) and then save the Software (.bin) file to it.
Menu functions and settings:
File Path: If the receiver finds files for updating on the USB memory device, it displays them. You can use
the arrows and the OK button to select the file that will be updated. If no file is found, 'No File' will appear on
the screen.
Section: With the arrows and the OK button here you can set which parts of the software you want to be up-
dated.
Start: Once you have selected the software file and the update mode, navigate with the up/down arrows to
the "Start" point. Press the OK button to start the update process.
Caution: The Software upgrade starts immediately with the OK button pressed and may not be interrupted.
Exit the "USB/HDD Update" menu by pressing the EXIT key.
Version of December 3th, 2021
Software upgrade
Basic information:
ΤThis menu is only available if a
suitable USB memory module,
which you recognize from the
receiver, is connected. Other-
wise you do not have access to
this menu.
A further requirement for "USB/
HDD Update" is that the corre-
sponding software file is located
on the USB memory drive. This
file with the ".bin" file extension
you can download it from your
HTTP (Online) Update:
Online Update Mode: Specify at
this point which area of the soft-
ware you want to be updated via
HTTP (Online).
You can choose between Soft-
ware & Loader or Software.
19