Power Switch - Bissell 44M3 User Manual

O
perations
automatic power cord rewind
1.
Gently pull out power cord and stop when
yellow line is visible. Do not pull power cord
beyond the red line. Plug cord into electrical
outlet.
2.
To return cord, with vacuum power button
OFF, remove plug from outlet. Hold plug and
press automatic cord button to wind cord
into reel. Do not allow plug to whip when
rewinding.

power switch

the power switch is located just below the
hand on the side of the vacuum.
i - on o - off
handle position
press the handle release pedal with your
foot to place vacuum into one of three
cleaning positions.
1.
upright: For storage, transporting, and above
floor cleaning with tools.
• Transporting in upright position by tilting
vacuum on rear wheels and push forward or
use carrying handle on back of handle base.
2.
normal cleaning: Press handle release
pedal once for most household floor cleaning.
3.
low cleaning: From normal cleaning posi-
tion, press handle release pedal once for
cleaning under low furniture.
6
w w w . b i s s e l l . c o m
CAUTION:
Be careful to avoid injury
as cord retracts very
quickly.
caution:
Before using your vacuum, make
sure that the dirt container is in
locked position and that all
filters (inner circular, outer
circular, pre-motor and post-
motor) are in place. Do not
operate your vacuum without
these filters.
8 0 0 . 2 3 7 . 7 6 9 1