Advertisement
If during the first 30 seconds of the learning mode (slow
flashing of U LED) the time measuring will not start (the
���� button is pressed or the roller blind is activated
from the local control input), the controller will exit the
learning mode.
The controller is designed to measure time span shorter
than 15 min. Attempting to set the controller for longer
span will result in exit from the learning mode.
The controller learning mode can be started only when
the roller blind motor is turned off.
Operation with factory settings (activation time set to 30
seconds) is indicated in standby mode by short (0.1 s)
blinking of U LED repeated every 4 s.
- 6 -
Advertisement
