Before You Clean - Bissell PROHEAT2X 8920 User Manual

O
perations
ReadyTools™ dial
this provides either floor cleaning or above
floor cleaning with the turn of a knob. choose
"tools" setting for stairs, upholstery and
hard to reach areas and "flooR cleaning"
for carpets, area rugs and bare floors.

Before you clean

1. Move furniture to another area if
cleaning an entire room (optional).
2. pick up all loose dirt, debris, and pet hair
before deep cleaning. if you're clean-
ing just a small area of carpeting or less
than a whole room, the proheat 2X deep
cleaner may be used to vacuum the area
before deep cleaning. if so, be sure to
keep the red filter screen (in the 2-in-1 tank
lid) cleaned of lint so that suction is main-
tained. When you're done, clear the red
filter screen and then rinse both the dirty
water and the clean solution tank (inside
the flexible bladder) with warm water
before starting the deep cleaning process.
3. plan your cleaning route to leave an exit
path. it is best to begin cleaning in the
corner farthest from your exit.
8
w w w . b i s s e l l . c o m
ATTENTION:
some berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggravate
this condition. please see stain
Removal instructions on page 14.
8 0 0 . 2 3 7 . 7 6 9 1