Cleaning With Attachments - Bissell PROHEAT2X 8920 User Manual

O
perations

Cleaning with attachments

Your PROheat 2X machine comes
equipped with a hose and at least
one attachment for cleaning stairs,
upholstery, and more.
1. Important! if using to clean
upholstery, check upholstery tags.
a. check manufacturer's tag before
cleaning. "W" or "Ws" on the tag
means you can use your pRoheat
2X. if the tag is coded with an "X"
or an "s" (with a diagonal stripe
through it), or says "dry clean
only", do not proceed with any
deep cleaning machine. do not use
on velvet or silk. if manufacturer's
tag is missing or not coded, check
with your furniture dealer.
b. check for colorfastness in an
inconspicuous place.
c. if possible, check upholstery stuffing.
colored stuffing may bleed through
fabric when wet.
d. plan activities to allow upholstery
time to dry.
e. pick up any loose dirt, debris and pet
hair before deep cleaning.
2. follow the instructions on pages 9-10
for filling the 2-in-1 water tank and the
formula tank.
3. set Readytools dial to the "tools"
setting. this will allow spray and suction
from the hose.
4. set custom clean dial for heavy traffic,
normal clean, light clean, or water rinse
as desired.
5. attach the cleaning tool to the end of
the hose.
6. plug in and turn on the power switch
and heater (if desired).
7. clean by pressing the trigger to spray
solution onto the area to be cleaned.
slowly move the tool back and forth
over the soiled surface. Release the
trigger to suction soiled water. continue
to clean in the area, working in small sec-
tions, until no more dirt can be removed.
Rinse (optional) and suction as needed.
Caution: Do no overwet.
12
w w w . b i s s e l l . c o m
Manufacturer's tag
5.
WARNING:
to reduce the risk of injury, be
extra careful when cleaning
stairs. make sure machine is
secure and level.
8 0 0 . 2 3 7 . 7 6 9 1