Brush Removal And Large Belt Replacement - Bissell PROHEAT2X 8920 User Manual

M
aintenance and care

Brush removal and large belt replacement

brushes can be removed for cleaning or
replacement as needed.
1. follow small belt removal instructions
on page 18.
2. Remove brush rolls by pulling them
off of the metal rods. Be careful
not to lose the small washer
at each end of the brush rolls.
3. place cleaned or new brush rolls back
onto the rods. make sure one washer is
on each end of the rollers prior to sliding
onto the rod. be sure to let the rod slide
through the bushing to insure proper fit.
4. Re-attach the long belt on the bottom
to the cogs of the small roller brushes.
5. place small belt over back roller and
metal cog.
6. place pivot arm in place and screw
in place using the silver screw.
7. Re-attach clear end cap by tightening
with the (2) black screws.
8. Return front nozzle to front of unit,
by latching from underneath and then
securing with a screw.
if you have any questions or are
having trouble installing or replacing
your belt(s) or brushes, please call
BISSELL Consumer Care.
w w w . b i s s e l l . c o m
WARNING:
to reduce the risk of fire,
electric shock or injury, unplug
from the outlet before servicing.
2.
4.
6.
8.
8 0 0 . 2 3 7 . 7 6 9 1
3.
5.
7.
19